An ePaper C64 Emulator, an SNES-Style RetroPie Device, a Wireless Smart Switch + More
A C64 emulator on ePaper.
Drive the relays of the MKR Relay Shield connected to a MKR GSM 1400 with an SMS.
Squeezing a Pi Zero W into an SNES cartridge form factor for portable retro gaming! Oh, and let’s throw some rainbows in there too…
Designed for Industry 4.0, but suitable for smart home too. Features WiFi control, current measuring, PWM, soft start / stop and safety.
This project is for making a 32-band audio (music) frequency spectrum analyzer / visualizer using Arduino.
120/240V AC or 30V DC power supply module for the Sony Spresense Expansion Board. Plug and power your projects for real world.
Create a TwilioIoT hotspot for sending a SMS using AWS Lambda & the AWS IoT button inside a car.
Combine Arduino Leonardo HID functionality with a distance sensor to improve computer security!
IN-14 Nixie tubes clock Raspberry Pi HAT NCS314, remote, GPS, and temperature.
This is plug and play: particulate matter (PM2.5) and volatile organic compounds (VOC), plus air pressure, temp and humidity.
Build your own Eurorack drum module.
A versatile & easy to use vehicle platform for hobby-grade projects: You focus on application logic and the library takes care of the rest.
Prevent back pain by detecting bad posture and correct it immediately!
An open source automatic transfer switch based on the Infineon CoolMOS™ C7 MOSFET.
This project combines eLua with an open source RISC-V CPU core to a powerful, self-hosted embedded platform for FPGAs.
Portable lighting station synchronized with music, with the Infineon CoolMOS C7 MOSFET.
Digitizing household mechanical switches with CoolMOS C7.
A four-legged robot imbued with the power of deep learning.
The older members among you can still remember DVD-ROM drives well: let’s take another look at the inner values of a paffdfdst technology.
Solid state precharge CoolMOS solution for automotive HV battery.
This clock uses the first 192 digits of Pi number to display the time in a 32 x 8 LED matrix in an original way.
Build a simple MQTT message board with Arduino Ethernet.
To get my entry pass to our #Seeed10 Annual Party, I weaved out an owl that has two huge light up eyes as my Light up Project.
A basic model train layout containing a passing siding with a train running around and stopping in an automated sequence.
A second project on how to use the Sens’it SDK to implement a feature to detect how long a window was open, and build a dashboard.
Cheapest and easiest Nixie clock in the world, the ONE TUBE.
Hand gesture control using Arduino Leonardo and IR sensors.
Detect gas, carbon monoxide, motion and water leaks with this multipurpose project.
Put smart LED strip to the lamp, under bed. Control intensity with a knob or wirelessly with push button or motion detector.
The project is useful for stress testing text UI input fields. It generates characters at a controlled rate by emulating a keyboard.
This project shows you how to successfully control a robot arm using the L9110 motor board, without using up all your Arduino outputs.
Make a fridge door alarm that sounds a buzzer if you leave your fridge door open for more than 10 seconds.
This project shows how to display data from BigClown sensors on a Raspberry Pi Sense HAT.
The circuit increases the efficiency of any 5V device. Just connect your device through this device and go efficiently.