Norway


was designed in collaboration with Sven Braun of zMors, which designs synths and other modulars for iOS. That notion alone makes the an exciting platform, as it was built as a platform for open music hardware, and a Microchip D51 microcontroller and a Lattice iCE40 .

The Doppler could be used as a music controller, as it was designed as a platform for open music hardware. (📷: Dadamachines)

“We are very excited about FPGAs but getting started with them is daunting especially because of the ecosystem of proprietary toolchains and expensive hardware. The Doppler takes away most of these pains by providing all the tooling to get you up and running.”

Considering FPGAs can be easily adapted for use with almost any applications, it should come as no surprise they could be used for creating music.

On the hardware end, the Doppler features an Arm Cortex-M4F (SAM D51), an FPGA 5000 LUT (1Mb RAM, 6 DSP cores, OSC, PLL), and is both Arduino IDE compatible and breadboard friendly. The board sports a micro USB port, 3.5V to 5.5V VCC, 4 X 4 LED matrix, 2X DAC pins, 10X ADC pins, and all GPIO have 3.3V logic level. It also offers a pair of user buttons, an AREF solder jumper, SWD program pin headers, and uses a UF2 bootloader with firmware uploaded via USB stick mode.

It should be noted that the Doppler development board is still in Beta form, and although they’ve gone through three months of testing, there still a possibility it can cause bugs in different applications. The board is now available for $44 on Dadamachines’ product page, while schematics, software packages, and examples have been uploaded to GitHub for those looking to build their own Doppler.



Source link

LEAVE A REPLY

Please enter your comment!
Please enter your name here